TP-101 Series Mounted PCB Test Point Jumpers
This low cost, printed circuit mounted test point jumper provides a reliable and economical solution for board level, trouble shooting applications. Available in a variety of popular mounting dimensions and loop profiles, the TP-101 series offers the designer flexibility in the placement of crucial test points on high density circuits.
The exclusive, detented leg feature of the TP-101 series permits greater production and installation efficiencies by providing self-positioning and retention during soldering operations. When mounted in the recommended .040", "plated through" hole, the detented legs provide a snug, interference fit that will maintain the test point's position while under the pressure of wave soldering operations.
The "above board" profile of the TP-101 readily accepts a wide range of test probes and spring clips while offering a compact and space saving size. Formed from spring grade brass wire stock with matte tin over nickel plating, this product assures many years of reliable service at an economical cost.
Specifications & Materials
Contact Material: 020" diameter 70/30 Brass Wire
Finish: .0001 Matte Tin over .00005 Nickel
Mounting Holes: Two, .040" diameter +/- .003", plated through holes
Taping Standard: 2.0 amperes
| Part Number | A | B |
| TP-101-10-T | .100 | .200 |
| TP-101-20-T | .200 | .300 |
| TP-101-25-T | .250 | .360 |
| TP-101-30-T | .300 | .400 |
*For other dimensions please contact the factory*
